Wiring Diagrams - Invacare LiNX Service Manual

Invacare® LiNX
Independent of type FKEY02 or FKEY02TDC the 4–way button switch or the 4–way toggle switch must be plugged into the
DB9 socket.

3.8 Wiring diagrams

The following diagrams show the wiring for a wheelchair in a complex configuration including multiple actuators,
lights and attendant control unit.
To identify the required cable length, see tables below or measure the cable after removing it.
Wiring for configurations of Modulite seat with lifter, tilt, recline, powered elevating legrests, lights, attendant control unit,
secondary remote, DLX-ACT400 and USB charger
Cable length may vary depending on mounting positions of primary and secondary remotes and of 4–way connector
GLM-CONX4.
16 1605129-C