Enable Indirect Navigation - Invacare LiNX Service Manual

Invacare® LiNX
• Left
• Right
• Ignored
If Ignored is selected, the wheelchair does not move in any
direction when the input's reverse quadrant is selected.
This parameter is not available when quadrant operation is
set to any of the 3Q modes.
Left Quadrant Operation
This parameter sets the direction that the wheelchair moves
when the left quadrant of the user input is selected. Options
available are:
• Forward
• Reverse
• Left
• Right
• Ignored
If Ignored is selected, the wheelchair does not move in any
direction when the input's left quadrant is selected.
Right Quadrant Operation
This parameter sets the direction that the wheelchair moves
when the right quadrant of the user input is selected.
Options available are:
• Forward
• Reverse
• Left
• Right
• Ignored
If Ignored is selected, the wheelchair does not move in any
direction when the input's right quadrant is selected.

7.8 Enable indirect navigation

For the iOS tool, there is only Menu Scan with Navigation
Timeout available at the moment.
Steps 1 and 2 must be made in each desired profile
and function.
1. From Home screen open desired profile.
2.
Set Enable Menu Scan to Yes.
3. From Home screen open desired function.
66
4. Set Navigation Timeout to Yes.
5. From Home screen open User Preferences.
6.
Set Navigation type to Menu Scan.
Other parameters
A Timeout for navigation entry: Sets inactivity time
required before system enters navigation mode, for
navigation mode with Navigation Timeout only.
B Menu Scan Rate: Sets rate at which menu scan
iterates through menu, for Menu Scan only.
C Number of Menu Scan Cycles before Idle: Number of
times menu is iterated through before going to idle,
assuming no user selection, for Menu Scan only.
D Scan Selection: Configures which quadrants of
Primary input can be used to make selections, for
Menu Scan only.
E Navigation type: Selects type of navigation.
F Navigation Entry: Sets entry point to menu.
G Navigation preference: Selects whether navigation
using touch interface has preference over navigation
using user input. If user input is selected, display
highlights current selection.
1605129-C