Invacare LiNX Service Manual page 34

Invacare® LiNX
1.
Insert joystick O in clamp N, pull clamp over adapter
block K and fix with screws L.
2.
Insert clamp plate B into cutout on tray A.
3. Fix clamp plate B, clamp ball C and upper clamp plate
D with screws E.
4.
Mount angle bracket F with screws G to tray A.
34
5.
Insert remote O into tray A.
6. Fix adapter block K to angle bracket F with screw H
and washer I.
Nucleus tray mount
• 1/8" Allen key
• 5/32" Allen key
• 3/16" Allen key
1.
Insert joystick O in clamp N, pull clamp over adapter
block M and fix with screws L.
2.
Insert clamp plate B into cutout on tray A.
1605129-C