Invacare LiNX Service Manual page 79

Changing motion name
1.
Click on Motion Name.
2. Enter new motion name.
Seating function
This parameter sets how the joystick operates a motion.
The joystick can control the motion as a switch or as a
proportional controller. There are four switch-type modes
and one proportional-type mode.
1.
Click on Functions.
2. Click on seating function you want to edit.
a.
Input Mode: Configuration of user input for this
seating function.
• Forward/Reverse: Moving joystick forward or
reverse to control motion.
1605129-C
Modifying wheelchair configuration with PC tool
• Left/Right: Moving joystick left or right to
control motion.
• Four Quadrant: Using all four joystick quadrants
to control motions.
If Four Quadrant is selected, all quadrant parameters
can be edited individually.
b.
Motion: If the joystick is used to control a motion,
then select the motion from the list of available
motions.
If the joystick is not used to control a motion, then
select No Motion from the list.
c. Operating Mode:
Switch-type
Switched
Latched
Toggle (only available
in Four Quadrant
operation)
Toggle / latch (only
available in Four
Quadrant operation)
Proportional type
Proportional
79