Modifying A Program; Writing A Program To The Wheelchair - Invacare LiNX Service Manual

as a spare part, it is provided with multiple wheelchair
configurations. Select the one you need.
1. Click on Chair Configs at the top of Home Screen. Chair
config screen is displayed.
2. Click on named wheelchair configuration. A Warning
screen is displayed.
3. Click on Yes to proceed with the selection.
4. Click on Back button to return to Home screen.
When a new wheelchair configuration is selected,
the system automatically power cycles before the
wheelchair configuration becomes active.

6.3.4 Modifying a program

To modify a program, first select a parameter from one of
the parameter sections listed on the Home screen:
• Drive functions
• Seating functions
• User preferences
• Chair setup
Parameters can be modified numerically or graphically, refer
to 9 Modifying wheelchair configuration with PC tool, page
77.
Parameters can be modified in live edit mode or in bulk
edit mode.
Live edit mode
When in live edit mode, changes to parameters will
take immediate effect, changing the performance of
the wheelchair immediately.
There is no function to undo a change in live edit
mode, so make sure, you save a copy of the existing
program so that you can restore settings if you need
to.
Not all parameters can be updated in live edit mode, these
are identified by a circular icon in front of the parameter
name.
Live edit mode allows certain parameters to be written to
the controller immediately. This is useful for speeding up
the process of setting up or testing various applications and
scenarios.
1605129-C
Bulk edit mode
Certain parameters can only be edited in bulk edit mode,
these are identified by a colored background. To edit
these parameters, bulk edit mode must be unlocked before
proceeding.
In bulk edit mode, parameters are not written to the
controller immediately. They are written to the controller,
when you select Write to Chair, refer to 6.3.5 Writing a
program to the wheelchair, page 53.
By default, live edit mode is enabled every time the system
is powered up, including after a power cycle. The application
remains in live edit mode until bulk edit mode is unlocked.
At this point the application changes to bulk edit mode while
live edit mode is disabled. The application remains in bulk
edit mode until the system is power-cycled.

6.3.5 Writing a program to the wheelchair

This feature is only available when a wheelchair is
connected.
1. Click on Application menu button.
2. Select Write to Chair.
After writing to the wheelchair, the LiNX Access tool cycles
the system's power and automatically reconnects to the
system.
The Application menu dialogue in this picture shows
all available options, when you are in Connection
context. In File context the selection is more limited.
Using the LiNX Access iOS tool
53