Step 5 - Adjust Acceleration Settings - Invacare LiNX Service Manual

Invacare® LiNX
1. Open Functions –> open desired drive function.
Adjust forward speed
Top speed of wheelchair can be reduced if desired. Set
speed dial or slider to maximum and deflect joystick forward.
Adjust Max Forward Speed parameter until forward speed
seems like comfortable value.
Adjust reverse speed
There is nothing physically preventing motors from driving at
same speed in reverse as forward. Set speed dial or slider
to maximum and deflect joystick in reverse. Adjust Max
Reverse Speed parameter to set how fast wheelchair drives
in reverse for comfortable and safe ride. Default is 50 %
of maximum forward speed.
Adjust minimum drive speeds
Set speed dial or slider to minimum and deflect joystick fully
forward. Adjust Min Forward speed until desired minimum
forward speed is reached.
Set speed dial or slider to minimum and deflect joystick fully
in reverse. Adjust Min Reverse speed until desired minimum
reversing speed is reached.
48
Adjust turn speed
Set speed dial or slider to maximum and deflect joystick
either left or right to turn wheelchair on spot. Wait until
wheelchair reaches a steady turning speed. Adjust Max Turn
Speed parameter until turn speed seems like a comfortable
maximum.
Set speed dial or slider to minimum position to adjust Min
Turn Speed.
Adjust veer compensation
1.
Open Chair Setup –> Modules –> Power Modules.
If wheelchair's motors do not perform exactly the same as
each other, wheelchair does not drive in a straight line.
To compensate differences between motors, adjust Veer
Compensation parameter.
5.5 Step 5 – Adjust acceleration settings
The following parameters must be set for each drive function.
1605129-C