Power Module Mounting - Invacare LiNX Service Manual

Invacare® LiNX
Powered seating accessories

3.4 Power module mounting

The mounting orientation of the power module that is
specified by Invacare per wheelchair model must be kept.
Dimensions of the power modules
DLX-PM60, DLX-PM75, DLX-PM120
DLX-PM75AL, DLX-PM120AL
10
10 way switch
• Hardware-only module
that provides simple,
direct access to
powered seating
functions
DLX-FKEY01
• For systems with one
physical actuator
• Powered seating
control through egg
switch, stereo button
switch or stereo toggle
switch
DLX-FKEY02
• For systems with two or
more physical actuators
• Powered seating
control through 4–way
button switch or 4–way
toggle switch
DLX-GYR100
LiNX G-Trac module
• stabilizes wheelchair's
driving behavior
DLX-USB02
LiNX USB charger
• 2 USB charger ports
• 1 A charging current
per port
• Protective rubber
bungs
Correct mounting
A Rear
B Connectors
C Top
D Base
The power modules can be placed on its side or at an angle.
When placing the power modules at an angle, ensure that
the connectors B facing downwards, so that the connector
recesses will not collect or retain foreign matter or liquids.
Incorrect mounting
1605129-C