Modifying Drive Parameters Graphically - Invacare LiNX Service Manual

1. Open Drive or Seating function. Tap on field with
function name.
2.
Unlock Bulk Mode before modifying the name.
3. Enter new name.
4.
Tap on Back.
Profile names
1.
Open profile. Tap on field with function name.
2. Enter new name.
3. Tap on Back.

7.3 Modifying drive parameters graphically

A number of drive parameters can be edited graphically only
with the iOS Access Tool. The speed graph is shown at the
top of the parameter list. All other graphs are accessed from
this screen, as detailed in the following sections.
1605129-C
Modifying wheelchair configuration with iOS tool
Editing speed settings
The Speed graph allows you to adjust:
• Maximum Forward Speed A
• Maximum Turn Speed B
• Maximum Reverse Speed C
1. Tap and drag the colored circles inwards or outwards to
decrease or increase parameter values.
The exact value for each parameter is shown at the
top of the screen when adjusting the parameter and
it is also displayed in the parameter list.
If a gyro module is enabled, the graphic in the center
of the graph changes from a person in a wheelchair
to a gyroscope to indicate that the parameter being
changed are gyro-specific.
Editing acceleration / deceleration settings
The acceleration / deceleration parameters are only
accessible through the Speed graph screen. To edit one of
the acceleration or deceleration settings, press and hold one
of the colored circles in the Speed graph screen.
61