Mounting The Micro Extremity Control Joystick - Invacare LiNX Service Manual

3. Fix clamp plate B, clamp ball C and upper clamp plate
D with screws E.
4.
Mount angle bracket H with screws I to tray A.
5.
Insert remote O into tray A.
6. Fix adapter block M to angle bracket H with screw J
and washer K.
7.
Pull hitch mount G over nucleus and tighten with screw
P.
Nucleus only mount
• 1/8" Allen key
• 5/32" Allen key
1. Pull adapter block B over nucleus and tighten with
screw A.
2. Insert remote E into clamp D.
3. Mount clamp D to adapter block B with screws C.
1605129-C

3.11.2 Mounting the Micro Extremity Control Joystick

Lateral tray mount
• 1/8" Allen key
• 5/32" Allen key
• 3/16" Allen key
1. Insert clamp plate B into cutout on tray A.
2. Fix clamp plate B, clamp ball C and upper clamp plate
D with screws E.
3.
Insert remote H from below into tray A. Make sure,
arrow I shows into reverse driving direction.
Nucleus tray mount
• 1/8" Allen key
• 5/32" Allen key
• 3/16" Allen key
Assembly
35