Invacare® LiNX
1. Insert clamp plate B into cutout on tray A.
2. Fix clamp plate B, clamp ball C and upper clamp plate
D with screws E.
3.
Insert remote J from below into tray A. Make sure,
arrow K shows into reverse driving direction.
4.
Pull hitch mount G over nucleus and tighten with screw
P.
Nucleus only mount
•
1/8" Allen key
•
5/32" Allen key
1. Pull adapter block B over nucleus and tighten with
screw A.
2. Insert remote E into clamp D. Make sure, arrow F (not
visible in picture) shows into reverse driving direction.
3. Mount clamp D to adapter block B with screws C.
3.11.3 Mounting the Pediatric Compact Joystick
Lateral tray mount
•
1/8" Allen key
•
5/32" Allen key
•
3/16" Allen key
36
1.
Insert remote O into clamp N. Pull clamp over adapter
block K and tighten with screws L.
2.
Insert clamp plate B into cutout on tray A.
3. Fix clamp plate B, clamp ball C and upper clamp plate
D with screws E.
4.
Mount angle bracket F with screws G to tray A.
5.
1605129-C