Using The Linx Access Ios Tool; Navigation Bar; Application Menu; Changing The Program Name - Invacare LiNX Service Manual

Invacare® LiNX

6 Using the LiNX Access iOS tool

6.1 Navigation bar

The navigation bar is located at the top of each screen. The
content of the navigation bar changes depending on the
screen you are viewing.
A Context switch (switch between connection and file
context mode)
B Application menu button (edit button)
C Program name / screen name
D Close / navigate to previous screen

6.1.1 Application menu

The content of the application menu changes depending
in which context mode you are working with: Connection
context or File context.
Connection context
To work on a connected wheelchair, select Connection
context. If you are not connected to a LiNX system the
Connect to device screen is displayed. Otherwise, the last
screen that you were working with, is displayed.
The following options are available in connection context:
• Save – save the configuration as a LiNX configuration
file (.lci)
• Save As – save the configuration as a LiNX configuration
file (.lci) with a different name
• Read from Chair – read the configuration from the
connected LiNX system
• Write to Chair – write the configuration to the
connected LiNX system
• Upgrade – go to firmware upgrade mode
• Store authorization – store an Access Level Certificate
50
File context
To work on a saved file, select File context. If you do not
have a file open, the Load from file screen is displayed.
Otherwise, the last screen that you were working on is
displayed.
The following options are available in file context:
• Save – save the configuration as a LiNX configuration
file (.lci)
• Save As – save the configuration as a LiNX configuration
file (.lci) with a different name
• Write to Chair – write the configuration to the
connected LiNX system
Selecting context mode
Click on the context switch at any time to toggle between
Connection context and File context. The selected context
displays a colored bar beneath the context switch icon.

6.1.2 Changing the program name

By default, the program name and system name are
composed of the wheelchair configuration. The program
name can be changed to a more familiar name.
A Propulsion R = Rear wheel drive
C = Center wheel drive
F = Front wheel drive
01 = Kite
B Model
02 = TDX SP2
03 = Bora/Spectra
04 = Fox
05 = Storm
06 = Storm
4 , Storm 4 X-plore
4 Max
1605129-C