Mounting Dlx-Rem2Xx For Ultra Low Maxx - Invacare LiNX Service Manual

3. Pull screws F through washers E, bracket C and
bracket G and tighten screws.
4.
Tighten remote H with screws J and washers T to
bracket G.
Remote holder for attendant
The remote is fitted to the wheelchair using a bracket on the
push handle or the push bar.
• 4 mm Allen key
• 3 mm Allen key
1605129-C
1. Pull screws A through washers B, mounting plate C
and bottom side of bracket D.
2. Tighten bottom side of the bracket to push bar with the
top side of the bracket E and nuts F.
3.
Fix remote to bracket I with screws G and washers H .
For mounting positions, refer to 3.10.3 Mounting the
DLX-REM050, page 33.

3.9.2 Mounting DLX-REM2XX for Ultra Low Maxx

Standard remote holder
• 3 mm Allen key
• 8 mm wrench
1.
Mount joystick holder A to remote adapter B with
screws C, washers D and nuts E.
2.
Mount remote H to remote adapter B with screws F
and washers G.
Swing away remote holder
• 3 mm Allen key
• 4 mm Allen key
• 8 mm wrench
• 10 mm wrench
Assembly
27