Invacare LiNX Service Manual page 37

Fix adapter block K to angle bracket F with screw H
and washer I.
Nucleus tray mount
• 1/8" Allen key
• 5/32" Allen key
• 3/16" Allen key
1.
Insert remote O into clamp N. Pull clamp over adapter
block K and fix with screws L.
2.
Insert clamp plate B into cutout on tray A.
3. Fix clamp plate B, clamp ball C and upper clamp plate
D with screws E.
1605129-C
4.
Mount angle bracket H with screws I to tray A.
5.
Fix adapter block M to angle bracket H with screw J
and washer K.
6.
Pull hitch mount G over nucleus and tighten with screw
P.
Nucleus only mount
• 1/8" Allen key
• 5/32" Allen key
1. Pull adapter block B over nucleus and tighten with
screw A.
2. Insert remote E into clamp D.
3. Mount clamp D to adapter block B with screws C.
Assembly
37