Modifying Wheelchair Configuration With Pc Tool; Profile And Function Actions - Invacare LiNX Service Manual

9 Modifying wheelchair configuration
with PC tool

9.1 Profile and function actions

In bulk edit mode:
• profiles can be added and deleted,
• functions can be added, deleted, copied and moved.
A system always includes a REM2xx Drive Function
profile and a REM2xx Seating Function profile. These
cannot be moved or deleted.
1. Open Functions.
2.
Select desired profile or function action in the toolbar.
A Add profile
B Add function
C Copy function
D Delete function or profile
Add profile
1.
Click on icon A.
New profile is displayed in Functions.
2. Change name of profile, refer to 9.2 Modifying function
and profile names, page 78.
New profile is displayed as invalid as long as no
function is added to the profile.
1605129-C

Modifying wheelchair configuration with PC tool

Add user function
1.
Click on icon B.
2.
Click on icon E to add drive function.
Click on icon F to add seating function.
Click on icon G to add connectivity function.
Dialog box is displayed.
3.
Enter a function name.
4. Select Function User Input.
5. Click OK.
For more information about modifying the drive parameters,
refer to 9.3 Modifying drive parameters, page 78.
For more information about modifying the seating
parameters, refer to 9.4 Modifying seating parameters, page
78.
For more information about setting up a mouse mover, refer
to the user manual of the remote.
Copy function
1. Select function you want to copy.
2.
Click on icon C.
Copied function appears directly under original function.
3. Edit function as required.
Move function
Functions can be reordered by dragging and dropping inside
a profile or between profiles.
77