Modifying Drive Parameters Numerically; Modifying Seating Parameters - Invacare LiNX Service Manual

Invacare® LiNX
• Press and hold the Max Forward Speed circle to be
taken to the Forward acceleration A / deceleration B
screen.
• Press and hold the Max Turn Speed circle to be taken
to the Turn acceleration C / deceleration D screen.
• Press and hold the Max Reverse Speed circle to be
taken to the Reverse acceleration E / deceleration F
screen.
For each acceleration / deceleration parameter, the
acceleration value can be modified with the upper graph, the
deceleration value can be modified with the lower graph.
1. Press and drag the colored circles to decrease or
increase the parameter values. All changes to the
acceleration / deceleration values are displayed at the
top of the screen.

7.4 Modifying drive parameters numerically

All drive parameters can be edited numerically.
1. Select a parameter to edit.
2. Click on the parameter's name to open the parameter's
details. Default, minimum and maximum values will be
displayed, as well as the parameter's summary.
3. There are different ways to modify the parameters:
a. Increment and decrement the parameter with the
plus (+) and minus (-) buttons A. Click these buttons
to change the value in discrete steps or click and hold
the buttons to change the value more quickly.
b. Set the parameter value by clicking on the Low,
Default or High buttons B.
When you edit a parameter's value, its background
color will change to indicate that it has changed
from its previous value. Once the value is written to
the controller (or file), the background will revert
to white.
When in live edit mode, it might be difficult to see
the parameter background changing since the live
edit operation can take place very rapidly.
62

7.5 Modifying seating parameters

Seating motion
1. From Home screen click on Chair Setup.
2. Click on Motion.
3. Select seating motion you want to change.
Changing motion name
1.
Tap on field Motion Name.
2. Unlock Bulk Mode before modifying name.
3. Tap on Back.
Seating function
This parameter sets how the joystick operates a motion.
The joystick can control the motion as a switch or as a
proportional controller. There are four switch-type modes
and one proportional-type mode.
1. From Home screen open desired seating function.
a.
Input Mode: Configuration of user input for this
seating function.
• Forward/Reverse: Moving joystick forward or
reverse to control motion.
1605129-C