Invacare LiNX Service Manual page 63

• Left/Right: Moving joystick left or right to
control motion.
• Four Quadrant: Using all four joystick quadrants
to control motions.
If Four Quadrant is selected, all quadrant parameters
can be edited individually.
b.
Motion: If the joystick is used to control a motion,
then select the motion from the list of available
motions.
If the joystick is not used to control a motion, then
select No Motion from the list.
c. Operating Mode:
1605129-C
Modifying wheelchair configuration with iOS tool
Switch-type
Switched
Latched
Toggle
Toggle / latch
Choose one of the switch-type modes to operate the
motion at a fixed speed. The motion is activated
when the joystick is deflected past the Joystick Switch
Threshold B into either the forward A or backward
C quadrants. Refer to 7.6 Joystick Switch Threshold,
page 64 how to modify the Joystick Switch Threshold.
Choose the proportional-type mode to operate the
motion at a speed that is proportional to the joystick's
position. The motion is activated when the joystick is
deflected out of neutral into either the forward A or
backward C quadrants.
If the joystick is not used to control this motion, then
set this parameter to Not Used.
Operation
Switched
Latched
Proportional type
Proportional
Purpose
Activates the motion in
the extend / retract
direction for the
duration that the
joystick is deflected
forwards / backwards
and its position is
greater than Joystick
Switch Threshold. The
motion is deactivated
when it reaches its
end-of-travel or when
the joystick's position is
less than the Joystick
Switch Threshold.
Activates and latches
the motion in the
extend /retract direction
when the joystick is
momentarily deflected
forwards / backwards
across the Joystick
Switch Threshold. The
motion is deactivated
when the motion
reaches its end-of-travel
or the joystick is
deflected again across
the Joystick Switch
Threshold.
63