Saving Programs; Upgrading Firmware - Invacare LiNX Service Manual

Invacare® LiNX

6.3.6 Saving programs

Using Save
1. Click on Application menu button.
2. Select Save.
3.
When using Connection context mode, a Save As
menu opens up automatically. Enter a file name or the
program prompts the current program name with "–1"
if already existing.
4. After saving the program, the LiNX Access tool displays
a message with the file's name and that saving was
successful.
5. Click on Dismiss to remove the message and continue.
All files are saved with a .lci extension. If the Program
name has been set, then the file is saved with the
Program Name. If not, the file is saved with a date
/time stamp as follows:
YYYYMMDD-HHMMSS.lci (YYYY is year, MM is month,
DD is day, HH is hour, MM is minute, SS is second).
Subsequent saves will retain the last saved file name
and overwrite previously saved files. To save a file
without overwriting an existing file, us Save As, refer
to .
The Application menu dialogue in this picture shows
all available options, when you are in Connection
context. In File context the selection is more limited.
Using Save As
To save a program as file with a different name.
54
1. Click on Application menu button.
2. Select Save As. After saving the program, the LiNX
Access tool displays a message with the file's name and
that saving was successful.
3. Click on Dismiss to remove the message and continue.
All files are saved with a .lci extension. If the file
has not been saved before, and if the program
name has been set, then the file is saved with the
program name. If the file has been saved before
with the program name, then the file is saved
with a numerical value appended to the program
name. If the program name has been set, then the
file is saved with the program name. If not, the
file is saved with a date / time stamp as follows:
YYYYMMDD-HHMMSS.lci (YYYY is year, MM is month,
DD is day, HH is hour, MM is minute, SS is second).
The Application menu dialogue in this picture shows
all available options, when you are in Connection
context. In File context the selection is more limited.

6.3.7 Upgrading firmware

1605129-C