Address Filter Delete - SMC Networks 2552W-G User Manual

Command Line Interface
• An entry in the address table may be allowed or denied
access depending on the global setting configured for the
address entry default command.
Example
SMC-AP(config)#address filter entry 00-70-50-cc-99-1a
allowed
SMC-AP(config)#
Related Commands
address filter default (page 6-54)
show authentication (page 6-59)

address filter delete

This command deletes a MAC address from the filter table.
Syntax
address filter delete <mac-address>
mac-address - Physical address of client. (Enter six pairs of
hexadecimal digits separated by hyphens.)
Default
None
Command Mode
Global Configuration
Example
SMC-AP(config)#address filter delete 00-70-50-cc-99-1b
SMC-AP(config)#
Related Commands
show authentication (page 6-59)
6-56