11. Monitoring; Vlan Counter - D-Link DXS-3400 SERIES Web Ui Reference Manual

DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide

11. Monitoring

VLAN Counter

Utilization
Statistics
Mirror Settings
sFlow
Device Environment
External Alarm Settings
VLAN Counter
This window is used to display and configure the VLAN counter settings. This is used to create a control entry for
traffic statistics on specified Layer 2 VLAN interface(s).
To view the following window, click Monitoring > VLAN Counter, as shown below:
The fields that can be configured for VLAN Counter Settings are described below:
Parameter
Interface VLAN
Unit
From Port ~ To Port
Frame Type
Traffic Direction
Figure 11-1 VLAN Counter Window
Description
Enter the VLAN ID that will be used here. The range is from 1 to 4094.
Select the Switch unit that will be used for this configuration here.
Select the range of ports that will be used for this configuration here. Select the
All option to use all the ports in this configuration.
Select the frame type here. Options to choose from are:
• Broadcast - Specifies to count only broadcast frames.
• Multicast - Specifies to count only multicast frames.
• Unicast - Specifies to count only unicast frames.
• Any - Specifies to count all frames regardless of the frame type.
• All - Specifies to count all frames regardless of the frame type.
Select the traffic direction here. Options to choose from are:
• RX - Specifies to count ingress traffic.
• TX - Specifies to count egress traffic.
397