Ntp Associations - D-Link DXS-3400 SERIES Web Ui Reference Manual

DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide
To view the following window, click Management > NTP > NTP Interface Settings, as shown below:
The fields that can be configured are described below:
Parameter
NTP State
Click the Edit button to re-configure the specific entry.
Click the Apply button to accept the changes made.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.

NTP Associations

This window is used to display NTP association information.
To view the following window, click Management > NTP > NTP Associations, as shown below:
Click the Show Detail button to view more detailed information about the entry.
After clicking the Show Detail button, the following window will appear:
Figure 4-67 NTP Interface Settings Window
Description
After click the Edit button, select to enable or disable the NTP state for the
specified VLAN interface here.
Figure 4-68 NTP Associations Window
77