Dhcp Relay - D-Link DXS-3400 SERIES Web Ui Reference Manual

DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide
To view the following window, click Management > DHCP > DHCPv6 Server > DHCPv6 Server Interface Settings,
as shown below:
The fields that can be configured are described below:
Parameter
Interface VLAN
Pool Name
Rapid Commit
Preference
Interface Name
Click the Apply button to accept the changes made.
Click the Find button to locate a specific entry based on the information entered.
Click the Delete button to remove the specified entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
DHCPv6 Server Operational Information
This window is used to display the DHCPv6 server's operational information.
To view the following window, click Management > DHCP > DHCPv6 Server > DHCPv6 Server Operational
Information, as shown below:

DHCP Relay

DHCP Relay Global Settings
This window is used to display and configure the DHCP relay feature's global settings.
Figure 4-43 DHCPv6 Server Interface Settings Window
Description
Enter the interface's VLAN ID here. The range is from 1 to 4094.
Enter the DHCPv6 server's pool name here. This name can be up to 12
characters long.
Select to allow the proceeding of two-message exchanges or not by enabling or
disabling this option. By default, two-message exchange is not allowed.
Enter the preference value here. Select the Allow Hint option to allow hints.
Enter the interface's name here.
Figure 4-44 DHCPv6 Server Operational Information Window
58