System Log; System Log Settings - D-Link DXS-3400 SERIES Web Ui Reference Manual

DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide
Click the Apply button to accept the changes made.

System Log

System Log Settings

This window is used to display and configure the system's log settings.
To view the following window, click System > System Log > System Log Settings, as shown below:
The fields that can be configured for Log State are described below:
Parameter
Log State
Click the Apply button to accept the changes made.
The fields that can be configured for Source Interface Settings are described below:
Parameter
Source Interface State
Type
VID
Figure 3-11 System Log Settings Window
Description
Select the enable or disable the system log feature's global state here.
Description
Select this option to enable or disable the source interface's global state.
Select the type of interface that will be used. Options to choose from are
Loopback, Mgmt, and VLAN.
Enter the interface's VID used here. For loopback interfaces this ID can be from 1
to 8. For the management (Mgmt) interface this value is always 0. For VLAN
16