Ddm Bias Current Threshold Settings; Ddm Tx Power Threshold Settings - D-Link DXS-3400 SERIES Web Ui Reference Manual

DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide
Parameter
Unit
Port
Action
Type
Value
Click the Apply button to accept the changes made.

DDM Bias Current Threshold Settings

This window is used to display and configure the threshold of the bias current for specific ports on the Switch.
To view the following window, click OAM > DDM > DDM Bias Current Threshold Settings, as shown below:
The fields that can be configured are described below:
Parameter
Unit
Port
Action
Type
Value
Click the Apply button to accept the changes made.

DDM TX Power Threshold Settings

This window is used to display and configure the threshold of TX power for specific ports on the Switch.
To view the following window, click OAM > DDM > DDM TX Power Threshold Settings, as shown below:
Description
Select the Switch unit that will be used for this configuration here.
Select the port used for the configuration here.
Select the action that will be taken here. Options to choose from are Add and
Delete.
Select the type of voltage threshold. Options to choose from are Low Alarm, Low
Warning, High Alarm, and High Warning.
Enter the threshold value. This value must be between 0 and 6.55 Volt.
Figure 10-30 DDM Bias Current Threshold Settings Window
Description
Select the Switch unit that will be used for this configuration here.
Select the port used for the configuration here.
Select the action that will be taken here. Options to choose from are Add and
Delete.
Select the type of bias current threshold. Options to choose from are Low Alarm,
Low Warning, High Alarm, and High Warning.
Enter the threshold value. This value must be between 0 and 131 mA.
394