Qcn Cnpv Interface Simple - D-Link DXS-3400 SERIES Web Ui Reference Manual

DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide
Parameter
Admin Defense Mode
Alternate Priority
CNPV
Click the Apply button to accept the changes made.
Click the Find button to locate a specific entry based on the information entered.

QCN CNPV Interface Simple

This window is used to display the simple QCN configuration and status for each CNPV.
To view the following window, click QoS > QCN > QCN CNPV Interface Simple, as shown below:
The fields that can be configured are described below:
Parameter
Unit
Description
are specified by administrator.
• Auto - Specifies that the default CND defense mode and alternate priority
are controlled automatically.
• Comp - Specifies that the default CND defense mode and alternate priority
are determined by global setting. This is the default option. Comp stands for
Component.
Select the admin defense mode that will be used on the specified port(s) here.
Option to choose from are Disabled, Interior, Interior-ready, and Edge.
• Disable - Specifies that the congestion notification capability is
administratively disabled for this priority. This is the default option.
• Interior - Specifies that the priority parameter of frame input is not remapped
to or from this priority and the frames are transmitted without a CN-TAG.
• Interior-ready - Specifies that the priority parameter of frame input is not
remapped to or from this priority and the CN-TAGs won't be stripped off
when transmitting the frames.
• Edge - Specifies that the priority parameter of frame input at this priority is
remapped to an alternate value. Frames at other priorities are not remapped
to this priority and the frames are transmitted without a CN-TAG.
Select the alternate priority value that will be used on the specified port(s) here.
The range is from 0 to 7.
Select the CNPV value that will be used in the search here. The range is from 0 to
7.
Figure 7-36 QCN CNPV Interface Simple Window
Description
Select the Switch's unit ID that will be used here.
257