D-Link DXS-3400 SERIES Web Ui Reference Manual page 133

DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide
Parameter
Aging Time
Click the Apply button to accept the changes made.
The fields that can be configured in Port Settings are described below:
Parameter
Unit
From Port ~ To Port
State
Click the Apply button to accept the changes made.
MAC Settings and Surveillance Device
This window is used to display and configure surveillance devices and their MAC settings.
To view the following window, click L2 Features > VLAN > Auto Surveillance VLAN > MAC Settings and
Surveillance Device, as shown below:
The fields that can be configured are described below:
Parameter
Component Type
Description
Enter the aging time value here. This is used to configure the aging time for aging
out the surveillance VLAN dynamic member ports. The range is from 1 to 65535
minutes. When the last surveillance device connected to the port stops sending
traffic, and the MAC address of this surveillance device is aged out, the
surveillance VLAN aging timer will be started. The port will be removed from the
surveillance VLAN after expiration of surveillance VLAN aging timer. If the
surveillance traffic resumes during the aging time, the aging timer will be
cancelled.
Description
Select the Switch unit that will be used for this configuration here.
Select the range of ports that will be used for this configuration here.
Select to enable or disable the surveillance VLAN feature on the specified port(s)
here. When surveillance VLAN is enabled for a port, the port will be automatically
learned as surveillance VLAN untagged member, the received untagged
surveillance packets will be forwarded to surveillance VLAN. The received
packets are determined as surveillance packets if the source MAC addresses of
packets comply with the Organizationally Unique Identifier (OUI) addresses.
Figure 5-32 MAC Settings and Surveillance Device Window
Description
Select the component type here. Option to choose from are:
• Video Management server - Specifies the surveillance components type as
Video Management Server (VMS).
• VMS Client/Remote Viewer - Specifies the surveillance components type as
123