D-Link DXS-3400 SERIES Web Ui Reference Manual page 381

DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide
Parameter
Click the Apply button to accept the changes made.
After clicking the Add MA button, the following page will appear.
The fields that can be configured are described below:
Parameter
MA Name
MA VID
Click the Apply button to accept the changes made.
Click the Back button to return to the previous window.
Click the Edit button to modify the specified entry.
Click the Delete button to delete the specified entry.
Click the Add MEP button to add a new Maintenance association End Point (MEP) entry.
After clicking the Edit button, the following page will appear.
The fields that can be configured in the table are described below:
Description
• Chassis - Specifies to transmit the sender ID TLV with the chassis ID
information.
• Manage - Specifies to transmit the sender ID TLV with the managed address
information.
• Chassis-Manage - Specifies to transmit the sender ID TLV with the chassis
ID information and the managed address information.
Figure 10-3 CFM Settings (Add MA) Window
Description
Enter the Maintenance Association (MA) entry's name here. This name can be up
to 22 characters long. Each MA in an MD must have a unique MA name. MAs
configured in different MDs may have the same MA identifier. When the MA entry
is deleted, the configuration on it is also deleted.
Enter the Maintenance Association (MA) entry's VLAN ID here. The range is from
1 to 4094.
Figure 10-4 CFM Settings (Add MA, Edit) Window
371