Management; Command Logging; User Account Settings - D-Link DXS-3400 SERIES Web Ui Reference Manual

DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide
4.

Management

Command Logging

User Account Settings

Password Encryption
Password Recovery
Login Method
SNMP
RMON
Telnet/Web
Session Timeout
DHCP
DHCP Auto Configuration
DNS
NTP
IP Source Interface
File System
Stacking
Virtual Stacking (SIM)
D-Link Discovery Protocol
SMTP Settings
NLB FDB Settings
Command Logging
This window is used to display and configure enable or disable the command logging function. The command logging
function is used to log the commands that have successfully been configured to the Switch via the command line
interface. The requirement is to log the command itself, along with information about the user account that entered the
command into the system log. Commands that do not cause a change in the Switch configuration or operation (such
as show) will not be logged.
To view the following window, click Management > Command Logging, as shown below:
The fields that can be configured are described below:
Parameter
Command Logging State
Click the Apply button to accept the changes made.
User Account Settings
On this page, user accounts can be created and configured. Also on this page active user account sessions can be
viewed.
There are several configuration options available in the Web User Interface (Web UI). The set of configuration options
available to the user depends on the account's Privilege Level.
Figure 4-1 Command Logging Window
Description
Select to enable or disable the command logging function here.
27