Configuration Restore From Rcp - D-Link DXS-3400 SERIES Web Ui Reference Manual

DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
Unit
FTP Server IP
TCP Port
User Name
Password
Source File
Destination File
Replace
Click the Restore button to initiate the configuration restore.

Configuration Restore from RCP

This window is used to initiate a configuration restore from an RCP server.
To view the following window, click Tools > Configuration Restore & Backup > Configuration Restore from RCP,
as shown below:
Figure 13-12 Configuration Restore from FTP Window
Description
Select the Switch unit that will be used for this configuration here.
Enter the FTP server's IP address here. When select the IPv4 option, enter the
IPv4 address of the FTP server in the space provided. When the IPv6 option is
selected, enter the IPv6 address of the FTP server in the space provided.
Enter the TCP port number used for the FTP connection here. The range is from
1 to 65535.
Enter the user name used for the FTP connection here. This name can be up to
32 characters long.
Enter the password used for the FTP connection here. This password can be up
to 15 characters long.
Enter the source filename and path of the configuration file located on the FTP
server here. This field can be up to 64 characters long.
Enter the destination path and location where the configuration file should be
stored on the Switch. This field can be up to 64 characters long. Select the
running-config option to restore and overwrite the running configuration file on
the Switch. Select the startup-config option to restore and overwrite the start-up
configuration file on the Switch.
Select this option to replace the configuration file on the Switch with this one.
Figure 13-13 Configuration Restore from RCP Window
425