D-Link DXS-3400 SERIES Web Ui Reference Manual page 108

DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide
The fields that can be configured in D-Link Discovery Protocol are described below:
Parameter
D-Link Discovery Protocol
State
Report Timer
Click the Apply button to accept the changes made.
The fields that can be configured in DDP Port Settings are described below:
Parameter
Unit
From Port ~ To Port
State
Click the Apply button to accept the changes made.
Figure 4-98 D-Link Discovery Protocol Window
Description
Select to globally enable or disable the DDP feature here.
Select the report timer value here. This is used to configure interval between two
consecutive DDP report messages. Options to choose from are 30, 60, 90, 120
seconds; or Never. Selecting Never specifies to stop sending report messages.
Description
Select the Switch unit that will be used for this configuration here.
Select the range of ports that will be used for this configuration here.
Select to enable or disable the DDP feature on the specified port(s) here.
98