Network Access Authentication Port Settings - D-Link DXS-3400 SERIES Web Ui Reference Manual

DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide
Parameter
Authorization State
Click the Apply button to accept the changes made.
The fields that can be configured in User Information are described below:
Parameter
User Name
VID
Password Type
Password
Click the Apply button to accept the changes made.
Click the Delete button to remove the specified entry.

Network Access Authentication Port Settings

This window is used to display and configure the network access authentication port settings.
To view the following window, click Security > Network Access Authentication > Network Access Authentication
Port Settings, as shown below:
The fields that can be configured are described below:
Parameter
Unit
Description
Select to enable or disable the authorized state here. The option is used to enable
or disable the acceptance of an authorized configuration. When authorization is
enabled for authentication, the authorized attributes (for example VLAN, 802.1p
default priority, bandwidth, and ACL) assigned by the RADIUS server will be
accepted if the authorization status is enabled. Bandwidth and ACL are assigned
on a per-port basis. If in the multi-authenticated mode, VLAN and 802.1p are
assigned on a per-host basis. Otherwise, Bandwidth and ACL are assigned on a
per-port basis.
Description
Enter the user name used here. This name can be up to 32 characters long.
Enter the VLAN ID used here.
Select the password type option here. Options to choose from are Plain Text and
Encrypted.
Enter the password used here.
Figure 9-76 Network Access Authentication Port Settings Window
Description
Select the Switch unit that will be used for this configuration here.
350