Ddm - D-Link DXS-3400 SERIES Web Ui Reference Manual

DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide
The fields that can be configured in Ethernet OAM DULD Settings are described below:
Parameter
Recovery Time
Unit
From Port ~ To Port
Admin State
Action
Discovery Time
Click the Apply button to accept the changes made.
The fields that can be configured in Ethernet OAM DULD Table are described below:
Parameter
Unit
From Port ~ To Port
Click the Find button to locate a specific entry based on the information entered.
Click the Show All button to display all the entries.

DDM

This folder contains windows that perform Digital Diagnostic Monitoring (DDM) functions on the Switch. There are
windows that allow the user to view the digital diagnostic monitoring status of SFP/SFP+ modules inserting to the
Figure 10-26 Ethernet OAM DULD Settings Window
Description
Enter the time interval value used by DULD to decide how long to recover the
disabled port here. When the timer has expired, the disabled port by DULD will be
recovered automatically. 0 represents that this function is disabled. This value is
either 0 seconds or in the range from 60 to 1000000 seconds.
Select the Switch's unit ID that will be used here.
Select the Switch's port range that will be used here.
Select to enable or disable the admin state here. This feature is used to enable
Ethernet OAM unidirectional link detection on the specified port(s).
Select the action that will be taken here. Options to choose from are Normal and
Shutdown.
Enter the discovery time value here. The range is from 5 to 65535 seconds. By
default, this value is 5 seconds. If the OAM discovery does not successfully
negotiate before discovery time expired, OAM unidirectional link detection will
start.
Description
Select the Switch's unit ID that will be used here.
Select the Switch's port range that will be used here.
391