Ets Recommend Settings - D-Link DXS-3400 SERIES Web Ui Reference Manual

DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide

ETS Recommend Settings

This window is used to display and configure the ETS recommended settings on the specified interface. These
settings will be translated to a DCBX ETS recommendation TLV. The TLV is encoded into each LLDP message and
may be transmitted by a system in order to indicate a recommendation on how ETS should be configured.
To view the following window, click QoS > ETS > ETS Recommended Settings, as shown below:
The fields that can be configured are described below:
Parameter
Unit
From Port ~ To Port
Queue 1 ~ Queue 7
Queue ID
CoS
Click the Apply button to accept the changes made.
Figure 7-31 ETS Recommend Settings Window
Description
Select the Switch's unit ID that will be used here.
Select the Switch's port range that will be used here.
Select and enter the recommended bandwidth for traffic classes 0 to 7 here that
will be associated with the selected port(s). It is required to specify 8 values for
traffic class 0 to 7 respectively. The sum of the bandwidth assigned to a given port
is required at all times to be equal to 100. An operation that attempts to change
the bandwidth where the sum is not 100 will be rejected. The range is from 0 to
100 percent. The value of zero stands for strict priority mode. Select the None
option to disable this feature on the specified port(s).
Select the queue ID (traffic class ID) that will be associated with the port(s) here.
The range is from 0 to 7.
Enter the CoS value that will be associated with the selected port(s) here. The
range is from 0 to 7. Select the None option to disable this feature on the
specified port(s)
253