D-Link DXS-3400 SERIES Web Ui Reference Manual page 207

DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide
Parameter
Interface VLAN
Click the Apply button to accept the changes made.
Click the Find button to locate a specific entry based on the information entered.
Click the Show Detail button to view and configure more detailed settings for the IPv6 interface entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
After clicking the Show Detail button, the following page will be available.
The fields that can be configured are described below:
Parameter
IPv6 MTU
IPv6 State
Click the Back button to discard the changes made and return to the previous page.
Click the Apply button to accept the changes made.
The fields that can be configured for IPv6 Address Autoconfig are described below:
Parameter
State
Click the Apply button to accept the changes made.
The fields that can be configured for Static IPv6 Address Settings are described below:
Description
Enter the VLAN interface's ID that will be associated with the IPv6 entry.
Figure 6-11 IPv6 Interface (Detail, IPv6 Interface Settings) Window
Description
Enter the IPv6 MTU value here. The range is from 1280 to 65534 bytes. By
default, this value is 1500 bytes. This parameter is used to configure the MTU to
be advertised in RA messages.
Select to enable or disable the IPv6 interface's global state here.
Description
Select to enable or disable the automatic configuration of the IPv6 address using
the stateless auto-configuration feature here. Select the Default option to specify
that if the default router is selected on this interface, a default route will be
installed using that default router. This option can be specified only on one
interface.
197