Ip Source Guard - D-Link DXS-3400 SERIES Web Ui Reference Manual

DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide
Click the Clear Log button to clear the log.

IP Source Guard

IP Source Guard Port Settings
This window is used to display and configure the IP source guard port settings.
To view the following window, click Security > IMPB > IPv4 > IP Source Guard > IP Source Guard Port Settings,
as shown below:
The fields that can be configured are described below:
Parameter
Unit
From Port ~ To Port
State
Validation
Click the Apply button to accept the changes made.
IP Source Guard Binding
This window is used to display and configure the IP source guard binding settings.
To view the following window, click Security > IMPB > IPv4 > IP Source Guard > IP Source Guard Binding, as
shown below:
Figure 9-51 IP Source Guard Port Settings Window
Description
Select the Switch unit that will be used for this configuration here.
Select the appropriate port range used for the configuration here.
Select to enable or disable the IP source guard's state for the specified port(s)
here.
Select the validation method used here. Options to choose from are IP and IP-
MAC. Selecting IP means that the IP address of the received packets will be
checked. Selecting IP-MAC means that the IP address and the MAC address of
the received packets will be checked.
328