D-Link DXS-3400 SERIES Web Ui Reference Manual page 183

DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide
Parameter
Multicast VLAN IPv6 State
Ignore VLAN
VID
VLAN Name
Click the Apply button to accept the changes made.
Click the Delete button to delete an entry based on the information entered.
Click the Add button to add a new entry based on the information entered.
The fields that can be configured in Member Port Settings are described below:
Parameter
VID
Action
Role
Type
Unit
From Port ~ To Port
Click the Apply button to accept the changes made.
The fields that can be configured in Replace Priority Settings are described below:
Parameter
VID
Action
IP Type
Description
multicast VLAN, but does not match the associated profile, then the packet will be
forwarded or dropped based on this setting. By default, the packet will be
dropped.
Select to enable or disable the IPv6 IGMP control packet process in multicast
VLANs.
Select the enable or disable the ignore VLAN feature here. This specifies the
setting for tagged IGMP or MLD control packets. If enabled, then the packet's
VLAN is ignored and taken to match the profile to find its multicast VLAN. When
this option is enabled, the Switch will ignore the VLAN of the receiving IGMP or
MLD control packet and try to find a match profile.
Enter the VLAN ID of the multicast VLAN that will be created or deleted here. The
range is 2 to 4094.
Enter the VLAN name of the multicast VLAN that will be created or deleted here.
Description
Enter the multicast VLAN's ID that will be used here. The range is 2 to 4094.
Select Add to add a new entry based in the information entered.
Select Delete to delete an entry based in the information entered.
Select the role here. Options to choose from are Receiver and Source.
• Receiver - Specifies to configure the port as a subscriber port that can only
receive multicast data in the multicast VLAN.
• Source - Specifies to configure the port as an uplink port that can send
multicast data in the multicast VLAN.
Select the type here. Options to choose from are Tagged and Untagged.
• Tagged - Specifies that if a port is a tagged member, the packets sent from
the port are tagged with the Multicast VLAN ID.
• Untagged - Specifies that if the port is an untagged member, then the
packets will be forwarded in the untagged form.
Select the Switch's unit ID that will be used here.
Select the Switch's port range that will be used here.
Description
Enter the multicast VLAN's ID that will be used here. The range is 2 to 4094.
Select Add to add a new entry based in the information entered.
Select Delete to delete an entry based in the information entered.
Select the IP type here. Options to choose from are IPv4 and IPv6.
• IPv4 - Specifies to the remap priority for IPv4 multicast packets forwarded on
the multicast VLAN.
• IPv6 - Specifies to the remap priority for IPv6 multicast packets forwarded on
173