Rmon History Settings - D-Link DXS-3400 SERIES Web Ui Reference Manual

DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
After clicking the Show Detail button, the following window will appear.
Click the Back button to return to the previous window.

RMON History Settings

This window is used to display and configure RMON MIB history statistics gathered on the specified port.
To view the following window, click Management > RMON > RMON History Settings, as shown below:
The fields that can be configured are described below:
Parameter
Unit
Port
Index
Bucket Number
Interval
Owner
Click the Add button to add a new entry based on the information entered.
Click the Delete button to remove the specified entry.
Click the Show Detail button to see the detail information of the specific port.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
After clicking the Show Detail button, the following window will appear.
Figure 4-17 RMON Statistics Settings (Show Detail) Window
Figure 4-18 RMON History Settings Window
Description
Select the Switch unit that will be used for this configuration here.
Select the port that will be used here.
Enter the history group table index. The value is from 1 to 65535
Enter the number of buckets specified for the RMON collection history group of
statistics. The range is from 1 to 65535. The default value is 50.
Enter the time in seconds in each polling cycle. The range is from 1 to 3600.
Enter the owner string. The string can be up to 127 characters.
41