Iscsi Sessions - D-Link DXS-3400 SERIES Web Ui Reference Manual

DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide
Parameter
Session Aging Time
Click the Apply button to accept the changes made.
The fields that can be configured in iSCSI Targets and TCP Ports are described below:
Parameter
iSCSI Target Port
IP Address
Target Name
Click the Apply button to accept the changes made.
Click the Delete button to delete the specified entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.

iSCSI Sessions

This window is used to display the iSCSI active session table.
To view the following window, click QoS > iSCSI > iSCSI Sessions, as shown below:
Description
DSCP when egressing the Switch.
Enter the session aging time value here. The range is from 1 to 43200 minutes.
This is used to configure the aging time for iSCSI sessions. When configuring the
aging time to be longer than the current setting, the current sessions will be timed
out and use the new aging time. When configuring the aging time to be shorter
than the current setting, sessions that are longer than the new aging time will be
deleted, and sessions that are shorter than or equal to the new aging time will be
continue to be monitored with the new setting. Select the Default option to use
the default value which is 5 minutes.
Description
Enter the iSCSI target port number here. The range is from 1 to 65535.
Enter the IP address of the iSCSI target here.
Enter the iSCSI target name here. This string can be up to 255 characters long.
The name can be manually configured, or obtained from iSNS or from a
sendTargets response. The initiator must present both its iSCSI Initiator Name
and the iSCSI Target Name to connect in the first login request of a new session
or connection.
Figure 7-41 iSCSI Sessions Window
261