D-Link DXS-3400 SERIES Web Ui Reference Manual page 184

DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide
Parameter
Priority
Click the Apply button to accept the changes made.
The fields that can be configured in Replace Source IP Settings are described below:
Parameter
VID
Action
Address Type
IP Address
From
Click the Apply button to accept the changes made.
The fields that can be configured in Multicast VLAN Table are described below:
Parameter Description
VID Enter the multicast VLAN's ID that will be used here. The range is 2 to 4094.
Click the Find button to locate a specific entry based on the information entered.
Click the Show All button to view all the entries.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
Multicast VLAN Group Settings
This widow is used to view and configure the multicast VLAN's group settings.
To view the following window, click L2 Features > L2 Multicast Control > Multicast VLAN > Multicast VLAN Group
Settings, as shown below:
Description
the multicast VLAN.
Select the priority value here. The range is from 0 to 7. A lower value represents a
higher priority.
Description
Enter the multicast VLAN's ID that will be used here. The range is 2 to 4094.
Select Add to add a new entry based in the information entered.
Select Delete to delete an entry based in the information entered.
Select the address type here. Options to choose from are IPv4 and IPv6.
• IPv4 - Specifies to enter the source IPv4 address for IGMP control packet
reporting up to routers.
• IPv6 - Specifies to enter the source IPv6 address for MLD control packet
reporting up to routers.
Enter the IPv4/IPv6 address here.
Select the "from" option here. Options to choose from are Receiver, Source, and
Both.
• Receiver - Specifies that the source IPv4/IPv6 address of the IGMP/MLD
report/leave packet received on any multicast VLAN receiver port will be
replaced.
• Source - Specifies that the source IPv4/IPv6 address of the IGMP/MLD
report/leave packet received on any multicast VLAN source port will be
replaced.
• Both - Specifies that the source IPv4/IPv6 address of the IGMP/MLD
report/leave packet received on any port in the multicast VLAN will be
replaced.
174