Table of Contents
Advertisement
maintenance
Bulb Replacement
1. Turn off unit and allow to cool to room temperature.
2. Remove outer safety glass panels and inner panels (irebox glass)–see
instructions in this manual.
3. Loosen 2 outer screws on each side to remove outer light cover — located
in the upper inside front of the irebox and remove.
82
| City Series
4. Loosen 2 screws on each side of individual inner light cover and remove.
5. Remove glass cover by using a lat head screwdriver to pry the tab securing
the glass assembly in place.
6. Replace bulb and reverse steps to complete procedure.
NOTE: Do not handle bulb with bare hands. Use packaging or a tissue to hold
new bulb when replacing.
Regency Part# 911-208 Oven Lamp Assembly G9 120V/25W
Regency Part# 911-072 Replacement Bulb G9 120 Volt/25 watt
Advertisement
Table of Contents
