Table of Contents
Advertisement
Optional compact wood panel kit Installation CB40E
CV40E Glass Trim (Black Glass) Installation
The compact side glass trim pieces (black glass) may be installed to complete
the side of the appliance
1. To allow access for installation of the side glass trim piece, remove the
outside safety barrier glass and side (glass) panels,if installed - see manual
for instructions.
Remove side outer safety glass and side glass panel
(if installed) CB40E shown
2. Remove drywall inishing trim by loosening 2 screws - recycle trim.
2 screws
Glass
Side panel Outer safety
glass
Remove drywall trim
3. Carefully maneuver side trim piece into position—sliding it from the front
until the tabs on the side of the trim click into place with the unit.
Tabs shown for illustration purposes - tabs are on the
inside of the panel
4. Tighten screws loosened in Step 2 to secure side trim to unit.
5. Repeat steps 2-4 to install side trim piece on the opposite side.
6. Reinstall side panels and outside safety glass. (See manual)
Completed glass trim
installation
City Series |
27
Advertisement
Table of Contents
