Table of Contents
Advertisement
maintenance
Bulb Replacement
1. Turn off power and gas to the appliance and allow it to cool to room
temperature.
2. Remove outer safety glass panels and inner glass panels (firebox glass)–see
instructions in this manual.
• Only one side must be removed.
3RD ANGLE
Lights are located on top of the unit
PROJECTION
DO NOT SCALE
DRAWING
UNITS IN INCHES
3. Loosen two screws on each side of the individual inner light cover and remove.
4. Replace the bulb and reverse steps to complete the procedure.
• Do not handle bulb with bare hands. Use packaging or a tissue to
hold new bulb when replacing.
Regency part# 911-208 Oven lamp assembly G9 120V/25W
Regency part# 911-072 Replacement bulb G9 120 Volt/25 watt
Inner light covers shown from below
92
| City Series CP60E
TOLERANCES UNLESS
FIREPLACE PRODUCTS
-
MAT'L :
OTHERWISE STATED
INTERNATIONAL
SHEAR/ PUNCH/ FORM
DIMENSIONS
PROCESS :
0.000 = 0.01 CRITICAL
1:24
CP60 MAIN ASSEMBLY
SCALE:
PART :
0.000 = SPECIFIED TOLERANCE
0.000 = 0.031
11/25/2021
PART NO:
DWN:
DATE:
0.000 REF = REFERENCE ONLY
457-500
ANGULAR = 1
E.C.N.:
SIGN:
DATE:
THIS DRAWING IS THE PROPERTY OF FPI LTD., IT MAY NOT BE COPIED IN WHOLE OR IN PART, OR DISCLOSED TO A THIRD PARTY WITHOUT OUR PRIOR WRITTEN CONSENT.
REV:
-
Inner light covers close up
Light gasket
Light glass
Inner light cover reassembly order
Light cover
Advertisement
Table of Contents
