Table of Contents
Advertisement
owner's information
Bulb Replacement
1. Turn off power and gas to unit and allow to cool to room temperature.
2. Remove outer safety glass panels and inner panels (firebox glass)–see
instructions in this manual.
Lights are located behind the front face of the unit
3. Loosen 2 screws on each side of individual inner light cover and remove.
4. Replace bulb and reverse steps to complete procedure.
NOTE: Do not handle bulb with bare hands. Use packaging or a tissue to hold
new bulb when replacing.
Regency Part# 911-208 Oven Lamp Assembly G9 120V/25W
Regency Part# 911-072 Replacement Bulb G9 120 Volt/25 watt
Inner light covers shown from below
26
| City Series CV50E
Inner light covers close up
Light gasket
Light glass
Inner light cover reassembly order
Light cover
Advertisement
Table of Contents
