Table of Contents
Advertisement
Setting Profiles
Exporting Profiles to a File
Importing Profiles from a File
You can register and edit profiles on this machine using Profile Manager in the User Setting
plug-in. The following section describes some functions.
If you click
(Save to device), the changed settings are reflected to the machine.
Note
Before using Profile Manager, install the User Setting plug-in.
How to install plug-ins
Installing Software
About profiles
Profile
About icons
Starting Configuration Tool
Exporting Profiles to a File
1.
Click [Start], and then select [All Programs] > [Okidata] >
[Configuration Tool] > [Configuration Tool].
2.
Select the machine that has the profiles you want to export from
[Registered Device Table].
3.
Select the [User Setting] tab.
4.
Click [Profile Manager].
5.
Enter the administrator password, and then click [OK].
The factory default password is "aaaaaa".
6.
Click
(Export to file).
7.
Enter the name of a file, select a save destination folder, and then
click [Save].
Note
After exporting, the edited CSV file may not restore properly.
1196
Advertisement
Table of Contents
