Function Reference List - Furuno FELCOM 70 Operator's Manual

5. CONFIGURATION FROM PC
5.2

Function reference list

Reference number for direct selection. Click menu in main window and then key
in the number.
Ref. Function
1
Set default Net provider
2
Set access level
4 Phone setup menu
42 Call duration guard
43 MPDS Call waiting
44 Set time zone
47 Message indication
9 Advanced functions menu
91 Access control menu
911
Restrict dial
912
Access code
913
Restrict SIM usage
93
Software update prep.
94
Alarms and messages
97
Configuration menu
971
ISDN configuration
972
Net service providers
974
Set diagnostics
976
USB
979
Spot beam report method
98
Information available
982
Misc. version ld information
983
Transceiver status
984
EIRP table
989
Network status information
99
Customization menu
991
Paid functions
992
Phone name setup
5-2
Features
Allows changing Net service provider (and terrestrial network).
See "3.4 Selecting default Net service provider".
Allows shifting between user level and owner level, changing PIN
code and owner password. See "5.3 Access level".
Sets maximum call duration for 64 kbps calls.
Calls may be received during an MPDS session.
Sets time zone.
Switches indication of received call on/off.
See "5.6 Advanced functions".
Only allows calls from Phone Book. List of barred numbers may be established.
Set personal codes for using FELCOM 70.
Only allows calls with specific card, no card or any card.
Prepare software update.
See information on page 7-4.
Chooses between ISDN protocols.
Changing Net service provider data.
Allows additional system information to be displayed
Choose single port or dual port for USB operation.
Sending spot ID or position
See "5.6 Advanced functions".
Displays a series of version information windows.
Displays max/min voltages and temperatures in RF unit
Carrier status (not in use)
Displays various network status information.
See "5.6 Advanced functions".
Not in use
Allows altering the phone name.