Genie GS-1530 Service And Repair Manual page 66

Service and Repair Manual
Ground Controls
Skip to step 8 if the measurement is
correct.
6 To adjust, loosen the upper lock nut on the
cable mounting bracket at the cylinder. Turn
the lower lock nut clockwise to decrease the
distance or counterclockwise to increase the
distance. Tighten the upper lock nut.
1 manual lowering cable sheath
2 upper lock nut
3 cable mounting bracket
4 lower lock nut
5 cable mounting nut
6 end of lowering cable
7 manual lowering valve (hydraulic
schematic item N)
7 Repeat this procedure beginning with step 4.
8 Raise the platform and rotate the safety arm to
the stowed position.
9 Pull the manual lowering handle at the ground
controls 2 to 3 times to ensure it is functioning
correctly.
50 GS-30 • GS-32 • GS-46 • GS-47
September 2016
Part No. 1272217