Genie GS-1530 Service And Repair Manual page 165

September 2016
3 Pull out the red Emergency Stop button at the
ground controls.
Result: The ground control LCD display will
show the following.
4 Press the scroll down button.
Result: The ground control LCD display will
show the following.
5 Press the enter button.
Result: The ground control LCD display will
show the following.
6 Press the enter button.
Result: The ground control LCD display will
show the following.
Part No. 1272217
7
8
9
Note: After each key press an asterisk (*) will
appear on the second line of the LCD display.
Note: After 3 seconds the LCD display will return to
SELECT OPTION PLAT. OVERLOAD.
10 Push in the red Emergency stop button.
GS-30 • GS-32 • GS-46 • GS-47
Service and Repair Manual
Scissor Components
Press and hold the scroll down button for
5 seconds.
Result: The ground control LCD display will
show the following.
Press the enter button.
Result: The ground control LCD display will
show the following.
Press the buttons in the following sequence:
(down)(down)(up)(enter).
Result: The ground control LCD display will
show the following.
149