U099 Adjusting Original Size Detection - Kyocera TASKalfa 3510i Service Manual

Item No.
U099 Adjusting original size detection
Description
Checks the operation of the original size sensor and sets the sensing threshold value.
Purpose
To adjust the sensitivity of the sensor and size judgement time if the original size sensor malfunc-
tions frequently due to incident light or the like.
Method
1. Press the start key.
2. Select the item. The screen for executing each item is displayed.
Data1
B/W Level1
Data2
Method: [Data1/Data2]
1. Place the original and close the original cover or DP
2. The light source illuminates and the CCD sensor determines the width of the document. The
original size sensor determines the document is vertical or horizontal. (The document is
detected two times when the DP is installed.)
Original Area R
Original Area G
Original Area B
Original Area
Size SW L
Display
Displaying original size sensor transmission data
B/W LEVEL setting original size sensor threshold value
Setting original size judgment time
Displaying original size sensor transmission data
(when DP is installed)
Display
Detected original width size for color R
Detected original width size for color G
Detected original width size for color B
Detected original width size
Displays the original size sensor (OSS) ON/OFF
Description
Description
Description
1-3-57
2NL/2P8