When Dp Junction Pwb Is Used - Kyocera TASKalfa 3510i Service Manual

[When DP junction PWB is used]

13. Remove four screws and then refit it
after rotating the mount plate 180
degrees.
14. Insert the FFC into the copy guard PWB
until it clicks in.
WIth a DP junction PWB:
The FFCs is used at YC2 (serigraphed
on MAIN) and YC1 (Serigraphed on
DP).
15. Fix the copy guard PWB by inserting
two aperture parts to two hooks and
using the screw M3 x 6.
FFC(long)
Copy guard PWB
Screw
Screw
Mount plate
Figure 1-2-82
Hook
Hook
Aperture part
Aperture part
Figure 1-2-83
1-2-59
2NL/2P8
FFC(short)
Screw
Screw
YC2(MAIN)
YC1(DP)
Copy guard PWB
Screw