Kyocera TASKalfa 3510i Service Manual page 16

Item
First copy time
(A4, feed from cassette)
Warm-up time
(22 °C/71.6 °F, 60% RH)
Cassette
Paper
capacity
MP tray
Output tray capacity
Continuous copying
Light source
Scanning system
Photoconductor
Image write system
Charging system
Developer system
Transfer system
Separation system
Cleaning system
Charge erasing system
Fusing system
CPU
memory Standard
Standard
Interface
Option
Resolution
30ppm
When the DP is not used : 3.6 s or less
When using the DP
Power on : 23 s or less
Low power mode : 10 s or less
Sleep mode : 15 s or less
500 sheets (80g/m , 500 sheets x 2)
2
100 sheets (80 g/m , A4/Letter or less)
2
25 sheets (80 g/m , more than A4/Letter)
2
Inner tray : 250 sheets (80g/m
MP tray : 50 sheets (80g/m
1 to 999 sheets
White LED
Flat bed scanning by CCD image sensor
a-Si drum (diameter 30 mm)
Semiconductor laser:
AC+DC charger roller method
Mono component dry developing method
Toner replenishing: Automatic from the toner container
Transfer roller method
Small diameter separation, dischager brush
Counter blade cleaning + cleaning roller
Exposure by cleaning lamp (LED)
Heat and pressure fusing with the heat roller and the press roller
Heat source: halogen heater
Abnormally high temperature protection devices: thermostat
Freescale QorlQ P1022 (Dual Core) 800MHz
2 GB
USB interface connector: 1 (USB 2.0)
USB host: 4 (USB 2.0)
Network interface: 1 (10BASE-T/100BASE-TX/1000BASE-T)
Fax: 2
Network interface: 1 (10 BASE-T/100 BASE-TX/1000 BASE-T)
A maximum of two interface options can be installed.
Only one network interface can be installed.
When a network interface is installed, only one fax line can be installed.
600 × 600 dpi
1-1-2
Specifications
: 5.6 s or less
)
2
)
2
2NL/2P8-A
35ppm