7. Remove eight screws and remove the
controller box cover.
8. Remove five connectors, three USB
and FFC from the main PWB.
9. Remove six wire holders and release
the wires and FFC.
10. Remove the connector of the controller
fan motor from the main PWB.
11. Unhook two hooks of the wire guide
and then remove the wire guide from
the controller box.
Screw
Screw
Screws
Screws
Screw
Screw
Screw
Screw
Controller box
Wire holder
Connector
Hook
Hook
1-5-39
Controller box cover
Figure 1-5-67
Connectors
FFC
Wire guide
Figure 1-5-68
2NL/2P8-4
USB